Pre-milling unit.
Panel edge surface without any imperfections before the gluing operation through the removal operation that corrects any panel imperfections caused by the saw cutting process and panel storage. The independent exhaust system ensures the panel cleaning removing dust and chips from the panel. No. 4 different thickness removals: 0,5 / 1 / 1,5 / 2 mm.

Designed for a perfect finish
The very best finishing of the panel edge is also guaranteed  by the panel conveying track (exclusive solution), which prevents the panel having the feed affected by the typical pulses generatedby the pinion of a traditional feed track and ensures a smooth and linear panel movement.

Always precise when cutting
Absolute precision offered by the unit, with a cutter and an independent asynchronous.

Simple and intuitive
Error-free machining is ensured by the control panel positioned on the front of the machine, that allows an easy selection of all the main functions, among them, the operating units switching on and off. The PLC guides the operator during maintenance, cleaning, diagnostic operations, etc.

Machine in Brief:

Automatic edge bander with glue pot and pre-milling unit to edge band, with great flexibility, with melamine edges, PVC and ABS up to 3 mm and wooden strips up to 5 mm.

Fitted with the following options:

Automatic loading device for edges in strips

Device for panel edge heating

Technical data

me 28t
Work table dimensions	mm	2800 x 570
Min. ÷ max. thickness of rolled edges	mm	0,4 ÷ 3
Max. thickness of edges in strips	mm	5
Min. ÷ max. panel height	mm	12 ÷ 50
Min. panel length/width	mm	190/110
Feed speed	m/min	7

Media

Documentation

The post Used 2021 SCM Minimax ME28t RC **SOLD**Automatic Edgebander with Pre Milling appeared first on LHW Machinery.

The post SCM Minimax ME20 Hot Melt Edgebander, 0.4-2mm, 3 Phase (230v single phase available) appeared first on LHW Machinery.

0.4-2mm Thickness of edging. Up to 5mm thickness for strips.

Both 230v Single phase and 3 phase (less £250) available in stock now

The ME 20 automatic edge banders is entirely designed and built by MiniMax backed by the experience and expertise of the SCM Group.

Compact, precise and versatile. Rapid retooling when changing over from one edge band thickness to another. These were the main design specifications around which the machine was developed.
The ME20 will apply a variety of edge bands ranging in thickness from 0.4 mm to 2.0 mm. The machine has an automatic loader for edge rolls and a pneumatic end cutter unit which guarantees a clean, precision cut on the leading and trailing edges of the panel.

The trimming unit has its own 0.37 kW motor and trims the surplus edge banding using two, widia-tipped cutters with a 75 mm diameter. Trimming precision is guaranteed by two, chromed copiers which are bearing mounted to ensure smooth panel feed.

A top-mounted 0.18 kW feeder ensures uniform, powerful panel feed through the machine.

The ME20 has a non-stick, aluminium glue tank with 5 resistances providing uniform glue melting and heating. A knurled roller, with micrometric adjustment, applies the glue to the edge.

The machine is reasonably priced and therefore well within the reach of woodworking workshops and small carpentry businesses and what is, potentially, a wide market.

Technical specifications
working table dimension 1950x300mm
working table height 904mm
min/max edge thickness 0,4/1,5 – 2mm
min/max working thickness 10/45mm
motorized feeder speed 5m/min
trimmers cutting speed 12.000r.p.m.
carbide tip tools diam. 75 mm Z4-15°
aspiration outlet diam. 120mm
glue pot motor power 0.18 kw
working temperature 20-450 C°
feed motor power 0.18 kw
trimming motor power 0.37kw
total weight Kg 270
max. overall dimensions L= 2045mm P= 1135mm H= 1290mm

The post SCM Minimax ME20 Hot Melt Edgebander, 0.4-2mm, Available in 230v and 3 Phase appeared first on LHW Machinery.

New Minimax ME25 RC

With automatic loading device for strip edging

• Worktable Dimensions 2600 x 530
• Worktable Height 904mm
• Thickness of Rolled Edges 0.4 – 3mm
• Thickness of Edges in Strips 5mm
• Min – Max Panel Thickness 12 – 50mm
• Feed Speed 7m/min
• Glue Pot Capacity 0.5kg
• Min Panel Length 190mm
• Min Panel Length with Rolled Edges 15mm

OPERATING UNITS

GLUE POT UNIT, EDGE LOADING AND PRESSING SYSTEM
– hot melt glue with quick heat up system and internally teflon coated to allow an easy glue replacement
– glue application on the panel by means of glue spreading roller
– temperature adjustment of the applied glue integrated in the PLC control
– device for automatic recovery of unused glue
– automatic edge loading system for rolled edges with shear device for 3 mm max. thickness edges
– coil holder plate, 730 mm diameter
– pressing unit with n. 2 edge pressure rollers: one in steel and the second rubber coated
– adjustable infeed fence with numeric readout
– automatic lowering of the glue pot temperature after a temporary non-use of the machine

END CUTTING UNIT
With motor for 90° end cutting of front and rear exceeding edge.
The blade alignment with reference to the cutting point is carried out using a new copying device which ensures a constant and precise cutting under any working condition.

SUPERPOSED TRIMMING UNIT
Equipped with vertical copying pads for an accurate positioning of tools with reference to the cutting
point.

The unit is provided with 72 mm diameter, combined cutters: the radius part of the cutter is used to trim 2 mm radius edges and chamfered thin edges. The straight part of the cutter is used for the trimming of edges in wood up to 5 mm. Changing from radius edge to edge in wood is done easily moving the cutters axially. The edge thickness is shown by 2 numeric readouts.

EDGE SCRAPING UNIT
For the finishing of 3 mm PVC/ABS edges.
It assures an excellent vibration free finish thanks to its high rigidity structure.
High working precision thanks to the horizontal and vertical copying pads (with chrome plated surfaces), which assure an accurate positioning of the knives in relation to the cutting point.

GLUE SCRAPING UNIT
Eliminates excess glue
Improves panel cleaning

AUTOMATIC LOADING DEVICE FOR EDGES IN STRIPS

The post New SCM Minimax ME25 RC Hot Melt edgebander, 0.4-3mm ..Out of stock appeared first on LHW Machinery.

Pre-milling unit.
Panel edge surface without any imperfections before the gluing operation through the removal operation that corrects any panel imperfections caused by the saw cutting process and panel storage. The independent exhaust system ensures the panel cleaning removing dust and chips from the panel. No. 4 different thickness removals: 0,5 / 1 / 1,5 / 2 mm.

Designed for a perfect finish
The very best finishing of the panel edge is also guaranteed  by the panel conveying track (exclusive solution), which prevents the panel having the feed affected by the typical pulses generatedby the pinion of a traditional feed track and ensures a smooth and linear panel movement.

Always precise when cutting
Absolute precision offered by the unit, with a cutter and an independent asynchronous.

Simple and intuitive
Error-free machining is ensured by the control panel positioned on the front of the machine, that allows an easy selection of all the main functions, among them, the operating units switching on and off. The PLC guides the operator during maintenance, cleaning, diagnostic operations, etc.

Machine in Brief:

Automatic edge bander with glue pot and pre-milling unit to edge band, with great flexibility, with melamine edges, PVC and ABS up to 3 mm and wooden strips up to 5 mm.

Fitted with the following options:

Automatic loading device for edges in strips

Device for panel edge heating

Special End cutting Unit With ‘Radius Function’

Technical data

me 28t
Work table dimensions	mm	2800 x 570
Min. ÷ max. thickness of rolled edges	mm	0,4 ÷ 3
Max. thickness of edges in strips	mm	5
Min. ÷ max. panel height	mm	12 ÷ 50
Min. panel length/width	mm	190/110
Feed speed	m/min	7

Media

Documentation

The post New November 2025 SCM Minimax ME28t RC Automatic Edgebander with Pre Milling **Back In STOCK** appeared first on LHW Machinery.